4 Tips for Using Wood Planer

wood planer

Wood planers are woodworking machines that plane wood. They can either be manual or electric, and the wood is fed into them with a conveyor belt. The wood exits the machine at a set thickness, after passing between two rollers (a feed roller to pull the wood along and a discharge roller). It’s important that you know how to use your wood planer correctly because if you don’t, it could lead to injuries like cuts from exposed blades. Here are four tips for using your wood planer safely:

1) Always wear gloves when handling sharp tools like knives or scissors

A man that is standing in the snow

Sharp woodworking tools are unavoidable in woodworking, but this is not an excuse to cut corners. Wearing gloves will protect you from injury and infection while woodworking. They also help with grip when handling woodwork pieces that need precision cuts. The best gloves for woodworkers are the nitrile or vinyl-coated cloth type because they provide protection against fine splinters of wood without adding any extra bulk to your hands which could interfere with delicate work.

Nitrile or vinyl gloves can be purchased at most hardware stores and home improvement centers, but if you’re looking for a solid investment, look into buying one of these two types of gloves in bulk so that you’ll always have them on hand when needed.

2) Never try to cut through nails with these blades

A close up of a plant

Wood planers are woodworking tools that use a set of wood blades to shave wood from the surface. They come in many shapes and sizes, but most have a single blade at one end and a handle on the other. The woodworker moves the tool back and forth across the wood surface, drawing it towards them as they go. This causes one edge of the blade to cut into the wood while pushing against it with its opposite edge, shaving off bits of wood as it goes along. It’s this action that gives such tools their name: “planing” is just another word for “shaving.” But if you’re trying to figure out how to use your new wood planer, there are some things you should never do!

3) Make sure there’s nothing in front of you while operating this machine so your wood doesn’t come with a projectile

A wood planer is a machine that’s used to flatten wood. You can’t use one, though, if there are any obstacles in front of it. If you’re operating the wood planer and something gets in its way, for example another piece of wood or even your clothes, then the wood will come flying out at full force with no warning whatsoever. This could be really dangerous because it could hit someone standing nearby or even damage other objects nearby. So make sure there isn’t anything standing in front of you while using this machine!

4) Feed wood into wood planers at a steady pace, allowing the machine to plane the wood completely.

The wood planer is a woodworking tool used to plane wood down to a uniform thickness. Woodworkers use this machine for everything from creating wood flooring and window frames, to cutting boards and furniture parts.

The most basic wood planers feature a single blade that’s set at an angle in the middle of the machine; when you feed wood into one end, it passes over the blade, which cuts off roughly one-third of each piece’s thickness. The pieces then move through rollers on their way out of the other end of the machine, emerging with their final dimensions. While these machines are relatively simple to operate (you only need to make sure you’re feeding wood into them at a steady pace), they can be dangerous if you don’t understand wood planer safety tips.

When wood is first cut, it’s filled with moisture because wood cells contain water or sap. The wood may be denser at one end than the other, depending on where the tree grew and which way its trunk leaned. Wood also shrinks as it dries, so cutting wood removes most of its moisture and lessens this stress. However, wood also swells when it absorbs moisture (for example, when you use wood planer), and stress is reapplied to the wood fibers when wood planing planes wood thinner than before. The combination of these effects can cause wood to warp, crack or split apart.

Subscribe to our monthly Newsletter
Subscribe to our monthly Newsletter